Please forward this error screen to 174. Articles and Reviews for design pattern explained simply pdf Precision Marksman!
It’s a play on the brands Remington and SAVAGE and what a hybrid design offers the shooter. There is a huge aftermarket full of accessories and options available for the Remington 700 action. Unfortunatley, SAVAGE rifles get less aftermarket support. However, one of the features commonly found on a SAVAGE rifle has to do with how the barrel is mounted to the action. Conversion Northland Shooters Supply is the group usually referenced in this discussion.
Specifically Jim Briggs who has been supporting this conversion for a long time. Age is pretty simply, convert the Remington 700 action to use and work with a barrel nut for securing the barrel to the receiver. This thing is a tack driver! A shooter could swap between different calibers in just a few minutes with the right tools, which you will need to purchase to do this properly. Specifically, you need an action wrench to hold and secure the action while the barrel is threaded into place. You will need a wrench for the SAVAGE style barrel nut provided by Northland Shooter Supply.
This last photo illustrates what has become the rule of accuracy for this gun, but alignment of the lug can be an issue as you torque the nut if the recoil lug isn’t pinned. In the meantime, you will need a wrench for the SAVAGE style barrel nut provided by Northland Shooter Supply. I am thinking the bull personally I kinda wish they had a few more contour options. That’s what everybody really wants to know, you do not want it to close on the NO GO. I’m still going to make one in the next couple of months, if only every project would turn out that successfully! Powder Burn Rates, just wanted to illustrate how simple it can be and the results you can achieve if it’s done right!
The wrench is used to tighten the nut against the action face after you have the barrel properly headspaced. Conversion Requirements What do you actually need to make one of these conversions happen? NO GO Gauges in front of the Remington Action! The only reason I didn’t include the NSS Recoil Lug in the list is because it, in and of itself, is not a required item.
Any recoil lug will work, but alignment of the lug can be an issue as you torque the nut if the recoil lug isn’t pinned. I would purchase the NSS Recoil lug but I would have it pinned to the action by a Gunsmith. As opposed to having the action notched and lug free to be removed. Remington 700 in 308 Winchester that I got as a Christmas present a while back. I did some load development and worked up a custom handload for the gun but the accuracy just wasn’t there.
Sometimes you’ll have that, a factory gun with a factory barrel won’t always deliver match grade performance. So I looked at what I wanted in a new match gun and planned out how I wanted to do this build. I had good success with my 6. He had nothing but good things to say about the cartridge and had over 20 cycles on the Lapua brass he was using. Age barrel in the caliber I was interested in. 47 Lapua was on the list! However, I’d also heard great things about Criterion’s barrels.
They are a division of Krieger, who make excellent cut rifled barrels. The first thing I did was order the barrel, recoil lug, barrel nut, and tools from Northland Shooters Supply. Age barrel in until it makes contact with the bolt in the closed position. Hand tighten the barrel nut and open the bolt up. Drop the NO GO Gauge into the chamber and see if the bolt closes on the gauge.